xbit_to_bit :
An xbit-to-bit connector.

The xbit_to_bit primitive converts an xbit-type signal to a bit-type signal.

The parameter width sets the bit-width of the input and output signals in case they are vectors. The parameter strength sets the driving strength of the bit-type output signal (e.g. 4 for weak, 5 for pull, 6 for strong, and 7 for supply).

The parameters valueX and valueZ define the mapped values of logic X and logic Z, respectively. For example, if valueX is set to 0, all input values corresponding to logic X are treated as logic 0. They can be used to suppress the propagation of logic X and Z values.

Input/Output Terminals

Name	I/O	Type	Description
out	output	wire	bit-type output
in	input	xbit	xbit-type input

Parameters

Name	Type	Default	Unit	Description
width	integer	1	None	connector bit-width
strength	integer	6	None	driving strength (0~7)
valueX	logic	1’bx	None	mapped value of logic X
valueZ	logic	1’bz	None	mapped value of logic Z