tline_var :
A single-conductor, two-port transmission line with variable delay.
The tline_var
primitive models a single-conductor, two-port transmission line with a characteristic impedance of Z0
and variable propagation delay. The variable delay is controlled by the xreal-typed input delay
.
The real-array parameters ports
and data
together can define the frequency-dependent transfer characteristics between any selected source and destination ports of the transmission line. For instance, if the transmission or reflection coefficient from port 1 to port 2 can be described as the following s-domain transfer function H(s) having total of N partial fraction terms:
b1_real + j*b1_imag bN_real + j*bN_imag H(s) = ---------------------------- + ... + ---------------------------- , (s + a1_real + j*a1_imag)^m1 (s + aN_real + j*aN_imag)^mN
the parameter ports
shall contain the following entries for the source and destination port indices:
ports = '{ ..., 1, 2, ... }
and at the corresponding position, the parameter data
shall have the 5*N+1 entries:
data = '{ ..., N, // number of terms a1_real, a1_imag, b1_real, b1_imag, m1, // partial fraction term #1 a2_real, a2_imag, b2_real, b2_imag, m2, // partial fraction term #2 ... aN_real, aN_imag, bN_real, bN_imag, mN, // partial fraction term #N ... }
The parameters ports
and data
can be alternatively defined by a parameter definition file named filename
which defines the same named parameters in Python format. For any transmission characteristics not specified, the primitive assumes the reciprocal characteristics from the ones defined (e.g. S21=S12) and ideal characteristics for the rest (i.e. no transmission loss).
This primitive is a pseudo-module describing a structural netlist of electrical circuits and not a behavioral model by itself. The XMODEL simulator extracts an event-driven behavioral model at run-time based on the circuit network described by these circuit-level pseudo-modules.
Input/Output Terminals
Name | I/O | Type | Description |
pos_1 | input | xreal | positive terminal of port #1 |
neg_1 | input | xreal | negative terminal of port #1 |
pos_2 | input | xreal | positive terminal of port #2 |
neg_2 | input | xreal | negative terminal of port #2 |
delay | input | xreal | line propagation delay |
Parameters
Name | Type | Default | Unit | Description |
Z0 | real | 50.0 | ohms | characteristic impedance |
ports | real array | ‘{0.0} | None | source/destination ports |
data | real array | ‘{0.0} | None | transfer characteristics data |
filename | string | “” | None | parameter definition file |
abstol | real | 1e-3 | None | absolute tolerance for event-filtering |
reltol | real | 1e-2 | None | relative tolerance for event-filtering |
m | real | 1.0 | None | multiplicity factor |